| Housing/ Cover material: | | PPE/PA/PSU transparent |
| Control air and ambient temperature: | | -10... +50 °C |
| Control medium: | | Quality classes to DIN ISO 8573-1 |
| Control air connection: | | G 1/4, NPT_on request |
| Supply pressure*: | | 3... 7 bar |
| Flow capacity QNn: | | 100 L/min |
| Intrinsic air consumption: | | 0 L/min |
| Operating voltage: | | 24 V DC +/- 10% |
| Residual ripple: | | 10% not industrial DC |
| Power consumption : | | < 5 W |
| Electrical connection: | | 3 bushings (M16x1,5, screw terminals) |
| Set point setting: | | 0/4... 20 mA; 0...5/10 V |
| Input resistance for setpoint signal: | | 180 Ohm bei 0/4 - 20 mA
19 kOhm bei 0…..5/10 V |
| Sensor Inputs for process controller | | 4... 20 ma PT100, frequency |
| Input resistance for process value signal | | 180 Ohm with 0/4 - 20 mA
19 kOhm with 0... 5/10 V |
| Lift turn: | | 5... 45 mm |
| Options:
| | 2 binary outputs, inductive proximity switches, analog feedback, process controller |
| Bus communication: | | Profibus DP or DeviceNet |
| Operating panel and configuration: | | Module with 3 keys for parametrization |
| Display for setpoint and process value: | | 8-digit, 16 segment LC display |
| Type of protection: | | IP65 to EN 60529 |
| Conformity: | | CE to EMV-9/336/EWG |
| | | *Pressure stated in bar: are excess to atmosphere |
